Merge pull request #10 from linuxserver/bump_3.3.16

Bump 3.3.16

Dockerfile

@@ -7,8 +7,8 @@ ARG VERSION
 LABEL build_version="Linuxserver.io version:- ${VERSION} Build-date:- ${BUILD_DATE}"
 
 # package versions
-ARG QBITTORRENT_VER="3.3.12"
+ARG QBITTORRENT_VER="3.3.16"
-ARG RASTERBAR_VER="1.0.11"
+ARG RASTERBAR_VER="RC_1_0"
 
 # environment settings
 ENV HOME="/config" \
@@ -21,10 +21,16 @@ COPY patches/ /tmp/patches
 # install build packages
 RUN \
  apk add --no-cache --virtual=build-dependencies \
+	autoconf \
+	automake \
 	boost-dev \
 	cmake \
 	curl \
+	file \
 	g++ \
+	geoip-dev \
+	git \
+	libtool \
 	make \
 	qt5-qttools-dev && \
 
@@ -33,21 +39,20 @@ RUN \
 	boost-system \
 	boost-thread \
 	ca-certificates \
-	qt5-qtbase && \
+	geoip \
+	qt5-qtbase \
+	unrar && \
 
 # compile libtorrent rasterbar
- RASTERBAR_VER2=${RASTERBAR_VER//./_} && \
+ git clone https://github.com/arvidn/libtorrent.git /tmp/libtorrent && \
- mkdir -p \
+ cd /tmp/libtorrent && \
-	/tmp/rasterbar-src && \
+ git checkout ${RASTERBAR_VER} && \
- curl -o \
+ ./autotool.sh && \
- /tmp/rasterbar.tar.gz -L \
-	"https://github.com/arvidn/libtorrent/releases/download/libtorrent-${RASTERBAR_VER2}/libtorrent-rasterbar-${RASTERBAR_VER}.tar.gz" && \
- tar xf \
- /tmp/rasterbar.tar.gz -C \
-	/tmp/rasterbar-src --strip-components=1 && \
- cd /tmp/rasterbar-src && \
  ./configure \
-	--prefix=/usr && \
+	--disable-debug \
+	--enable-encryption \
+	--prefix=/usr \
+	--with-libgeoip=system && \
  make && \
  make install && \
  strip --strip-unneeded \

README.md

@@ -2,14 +2,103 @@
 [forumurl]: https://forum.linuxserver.io
 [ircurl]: https://www.linuxserver.io/irc/
 [podcasturl]: https://www.linuxserver.io/podcast/
+[appurl]: https://www.qbittorrent.org
+[hub]: https://hub.docker.com/r/linuxserver/qbittorrent/
 
 [![linuxserver.io](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/linuxserver_medium.png)][linuxserverurl]
 
-## This is a Container in active development by the [LinuxServer.io][linuxserverurl] team and is not recommended for use by the general public.
+The [LinuxServer.io][linuxserverurl] team brings you another container release featuring easy user mapping and community support. Find us for support at:
-
-If you want to comment\contribute on this container , are looking for support on any of our other work , or are curious about us in general, check out the following.
-
 * [forum.linuxserver.io][forumurl]
 * [IRC][ircurl] on freenode at `#linuxserver.io`
 * [Podcast][podcasturl] covers everything to do with getting the most from your Linux Server plus a focus on all things Docker and containerisation!
 
+# linuxserver/qbittorrent
+[![](https://images.microbadger.com/badges/version/linuxserver/qbittorrent.svg)](https://microbadger.com/images/linuxserver/qbittorrent "Get your own version badge on microbadger.com")[![](https://images.microbadger.com/badges/image/linuxserver/qbittorrent.svg)](https://microbadger.com/images/linuxserver/qbittorrent "Get your own image badge on microbadger.com")[![Docker Pulls](https://img.shields.io/docker/pulls/linuxserver/qbittorrent.svg)][hub][![Docker Stars](https://img.shields.io/docker/stars/linuxserver/qbittorrent.svg)][hub][![Build Status](https://ci.linuxserver.io/buildStatus/icon?job=Docker-Builders/x86-64/x86-64-qbittorrent)](https://ci.linuxserver.io/job/Docker-Builders/job/x86-64/job/x86-64-qbittorrent/)
+
+The [qBittorrent][appurl] project aims to provide an open-source software alternative to µTorrent.
+qBittorrent is based on the Qt toolkit and libtorrent-rasterbar library.
+
+[![qbittorrent](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/qbittorrent-icon.png)][appurl]
+
+## Usage
+
+```
+docker create \
+  --name=qbittorrent \
+  -v <path to config>:/config \
+  -v <path to downloads>:/downloads \
+  -e PGID=<gid> -e PUID=<uid>  \
+  -e UMASK_SET=<022> \
+  -e WEBUI_PORT=<8080> \
+  -e TZ=<timezone> \
+  -p 6881:6881 \
+  -p 6881:6881/udp \
+  -p 8080:8080 \
+  linuxserver/qbittorrent
+```
+
+## Parameters
+
+`The parameters are split into two halves, separated by a colon, the left hand side representing the host and the right the container side. 
+For example with a port -p external:internal - what this shows is the port mapping from internal to external of the container.
+So -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080
+http://192.168.x.x:8080 would show you what's running INSIDE the container on port 80.`
+
+
+* `-p 6881` - the port(s)
+* `-p 6881/udp` - the port(s)
+* `-p 8080` - webui port 
+* `-v /config` - where qbittorrent should store its config files
+* `-v /downloads` - path to downloads
+* `-e PGID` for GroupID - see below for explanation
+* `-e PUID` for UserID - see below for explanation
+* `-e UMASK_SET` for umask setting of qbittorrent, *optional* , default if left unset is 022. 
+* `-e WEBUI_PORT` for changing the port of the webui, see below for explanation
+* `-e TZ` for timezone information, eg Europe/London
+
+It is based on alpine linux with s6 overlay, for shell access whilst the container is running do `docker exec -it qbittorrent /bin/bash`.
+
+## WEBUI_PORT variable
+
+Due to issues with CSRF and port mapping, should you require to alter the port for the webui you need to change both sides of the `-p 8080` switch **AND** set the `WEBUI_PORT` variable to the new port.
+
+For example,  to set the port to 8090 you need to set `-p 8090:8090` and `-e WEBUI_PORT=8090`
+
+This should alleviate the "white screen" issue.
+
+### User / Group Identifiers
+
+Sometimes when using data volumes (`-v` flags) permissions issues can arise between the host OS and the container. We avoid this issue by allowing you to specify the user `PUID` and group `PGID`. Ensure the data volume directory on the host is owned by the same user you specify and it will "just work" ™.
+
+In this instance `PUID=1001` and `PGID=1001`. To find yours use `id user` as below:
+
+```
+  $ id <dockeruser>
+    uid=1001(dockeruser) gid=1001(dockergroup) groups=1001(dockergroup)
+```
+
+## Setting up the application
+
+The webui is at `<your-ip>:8080` and the default username/password is `admin/adminadmin`.
+
+Change username/password via the webui in the webui section of settings.
+
+
+## Info
+
+Shell access whilst the container is running: `docker exec -it qbittorrent /bin/bash`
+
+To monitor the logs of the container in realtime: `docker logs -f qbittorrent`
+
+* container version number 
+
+`docker inspect -f '{{ index .Config.Labels "build_version" }}' qbittorrent`
+
+* image version number
+
+`docker inspect -f '{{ index .Config.Labels "build_version" }}' linuxserver/qbittorrent`
+
+## Versions
+
++ **16.09.17:** Bump to 3.3.16, Add WEBUI_PORT variable and notes to README to allow changing port of webui.
++ **01.08.17:** Initial Release.

READMETEMPLATE.md

@@ -1,93 +0,0 @@
-[linuxserverurl]: https://linuxserver.io
-[forumurl]: https://forum.linuxserver.io
-[ircurl]: https://www.linuxserver.io/irc/
-[podcasturl]: https://www.linuxserver.io/podcast/
-[appurl]: https://www.qbittorrent.org
-[hub]: https://hub.docker.com/r/linuxserver/qbittorrent/
-
-[![linuxserver.io](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/linuxserver_medium.png)][linuxserverurl]
-
-The [LinuxServer.io][linuxserverurl] team brings you another container release featuring easy user mapping and community support. Find us for support at:
-* [forum.linuxserver.io][forumurl]
-* [IRC][ircurl] on freenode at `#linuxserver.io`
-* [Podcast][podcasturl] covers everything to do with getting the most from your Linux Server plus a focus on all things Docker and containerisation!
-
-# linuxserver/qbittorrent
-[![](https://images.microbadger.com/badges/version/linuxserver/qbittorrent.svg)](https://microbadger.com/images/linuxserver/qbittorrent "Get your own version badge on microbadger.com")[![](https://images.microbadger.com/badges/image/linuxserver/qbittorrent.svg)](http://microbadger.com/images/linuxserver/qbittorrent "Get your own image badge on microbadger.com")[![Docker Pulls](https://img.shields.io/docker/pulls/linuxserver/qbittorrent.svg)][hub][![Docker Stars](https://img.shields.io/docker/stars/linuxserver/qbittorrent.svg)][hub][![Build Status](http://jenkins.linuxserver.io:8080/buildStatus/icon?job=Dockers/LinuxServer.io/linuxserver-qbittorrent)](http://jenkins.linuxserver.io:8080/job/Dockers/job/LinuxServer.io/job/linuxserver-qbittorrent/)
-
-The [qBittorrent][appurl] project aims to provide an open-source software alternative to µTorrent.
-qBittorrent is based on the Qt toolkit and libtorrent-rasterbar library.
-
-[![qbittorrent](https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/qbittorrent-icon.png)][appurl]
-
-## Usage
-
-```
-docker create \
-  --name=qbittorrent \
-  -v <path to config>:/config \
-  -v <path to downloads>:/downloads \
-  -e PGID=<gid> -e PUID=<uid>  \
-  -e UMASK_SET=<022> \
-  -e TZ=<timezone> \
-  -p 6881:6881 \
-  -p 6881:6881/udp \
-  -p 8080:8080 \
-  linuxserver/qbittorrent
-```
-
-## Parameters
-
-`The parameters are split into two halves, separated by a colon, the left hand side representing the host and the right the container side. 
-For example with a port -p external:internal - what this shows is the port mapping from internal to external of the container.
-So -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080
-http://192.168.x.x:8080 would show you what's running INSIDE the container on port 80.`
-
-
-
-* `-p 6881` - the port(s)
-* `-p 6881/udp` - the port(s)
-* `-p 8080` - the port(s)
-* `-v /config` - where qbittorrent should store its config files
-* `-v /downloads` - path to downloads
-* `-e PGID` for GroupID - see below for explanation
-* `-e PUID` for UserID - see below for explanation
-* `-e UMASK_SET` for umask setting of qbittorrent, *optional* , default if left unset is 022. 
-* `-e TZ` for timezone information, eg Europe/London
-
-It is based on alpine linux with s6 overlay, for shell access whilst the container is running do `docker exec -it qbittorrent /bin/bash`.
-
-### User / Group Identifiers
-
-Sometimes when using data volumes (`-v` flags) permissions issues can arise between the host OS and the container. We avoid this issue by allowing you to specify the user `PUID` and group `PGID`. Ensure the data volume directory on the host is owned by the same user you specify and it will "just work" ™.
-
-In this instance `PUID=1001` and `PGID=1001`. To find yours use `id user` as below:
-
-```
-  $ id <dockeruser>
-    uid=1001(dockeruser) gid=1001(dockergroup) groups=1001(dockergroup)
-```
-
-## Setting up the application
-
-The webui is at `<your-ip>:8080` and the default username/password is `admin/adminadmin`.
-
-Change username/password via the webui in the webui section of settings.
-
-
-## Info
-
-* Shell access whilst the container is running: `docker exec -it qbittorrent /bin/bash`
-* To monitor the logs of the container in realtime: `docker logs -f qbittorrent`
-
-* container version number 
-
-`docker inspect -f '{{ index .Config.Labels "build_version" }}' qbittorrent`
-
-* image version number
-
-`docker inspect -f '{{ index .Config.Labels "build_version" }}' linuxserver/qbittorrent`
-
-## Versions
-
-+ **dd.MM.yy:** Initial Release.

root/etc/services.d/qbittorrent/run

@@ -1,8 +1,9 @@
 #!/usr/bin/with-contenv bash
 
 UMASK_SET=${UMASK_SET:-022}
+WEBUI_PORT=${WEBUI_PORT:-8080}
 
 umask "$UMASK_SET"
 
 exec \
-	s6-setuidgid abc /usr/bin/qbittorrent-nox
+	s6-setuidgid abc /usr/bin/qbittorrent-nox --webui-port="${WEBUI_PORT}"